Whirlpool Ice Maker Troubleshooting

When your ice maker begins to malfunction, there are a few ways to fix the problem. First, you may want to examine the water filter. You may also need to look at the control arm and the freezer. If you find a problem related to one of these components, you’ll need to determine whether you’re dealing with a blockage or freezing. If that doesn’t work, it’s time to get professional help. Luckily, several technicians in the area are well-versed in troubleshooting your Whirlpool ice maker.

Water filter

If you have a Whirlpool ice maker, there is a good chance it comes with a water filter. The filter helps to remove chlorine, sediment, and other contaminants from the water that goes to the ice maker. If your ice maker starts to leak or make a loud noise, you might want to change the filter.

Try searching on the Whirlpool website to help you locate the right filter for your appliance. They have an online search engine and graphics that show you where to look for the model you need.

Some models come with an in-the-fridge water filter that is easy to remove and replace. Other models may have a water filter inside the door.

Inline filters help to improve the taste of drinking water. The inline filter works with your Whirlpool refrigerator’s filter system to provide clean, fresh, and clean drinking water.

Control arm

If your ice maker is not making ice or is freezing up, you might need to fix the control arm. The control arm is a plastic handle that sits on top of the ice bin. It is responsible for gauging the ice level in the container. It signals the ice maker to stop producing ice when it is complete.

If your ice bin is overflowing, your ice maker may have a mechanical problem. Unplug your refrigerator and wait for five to ten minutes to repair this problem.

If the ice maker is still not working, you may need to reset it. Most ice makers have a reset button. You will need to contact the manufacturer or a repair technician if yours does not. You can remove the front cover plate and unscrew the ice tray.

You should be able to find the ice maker reset button in the ice tray. Sometimes, it is located at the bottom of the ice tray. It can also be found in the user manual.


If your refrigerator isn’t making any ice, there’s a good chance it has a blockage. A faulty water filter or a clogged water line can cause this. In some cases, the problem is a simple fix. Other times, you may need to call in a professional.

When a Whirlpool refrigerator doesn’t make ice, you’ll first want to check the water filter. If your filter is clogged, you’ll need to replace it. You may need to change your ice maker water line or repair it if it’s not.

You may also have a problem with your ice dispenser. The dispenser flap can get clogged by debris or ice. If you can’t open your ice dispenser, try using a hair dryer to dry it.

Other problems include a clogged ice maker valve, a broken control arm, or an icy water supply line. If you can’t resolve these issues, you’ll likely need to have your ice maker repaired by a professional.


If you’re wondering why your Whirlpool ice maker is freezing up, there are several common problems you can look for. If the problem isn’t resolved, it can lead to an expensive repair job. Luckily, many of these issues can be solved by a simple reset.

First, check to ensure the freezer isn’t set at an inappropriate temperature. If it’s too warm, the ice will melt and refreeze, and your refrigerator won’t work either.

Next, check the water supply line. Kinks in the line can cause a buzzing sound. If this is the case, it’s best to call a professional to fix it. You can also try using a hair dryer to heat the supply tubes.

If the problem is not resolved, the next step is to reset the ice maker. The reset button is usually located at the bottom of the ice bin but may be found on the top. It would be best if you held the button for a few seconds before you heard a beep.